BannerCat5e-6PatchCords

 

 

Home ] [ Up ] [ Modular Plugs & Jacks ] [ RJ-45 Snagless Boots ] [ Contact Us ]

 

IEEE 802.3 Ethernet Cat-5e & Cat-6 Patch Cords (Jumpers)

 

 

Typical RJ-45 Ethernet Patch Cords ~ Cat-5e & Cat-6

RJ-45 Ethernet Patch Cord (Jumper)

Standard Colors

 

Blue

 

Red

 

Yellow

 

Black

 

Gray

 

Green

 

Orange

 

White

 

Ivory

 

Violet

 

 

Elite Electronics offers its customers the highest quality fabricated Ethernet Category 5e & Category 6 Patch Cord Assemblies that meet or exceed the electrical and mechanical performance requirements of ANSI/TIA/EIA 568B-2.1:2001 and ISO/IEC 11801:2002.  Elite specifies and uses only the highest quality cable, RJ-45 plugs and snagless boots to fabricate its family of Ethernet CAT-5e and Cat-6 Patch Cords.  Elite offers a wide range of jacket materials, colors and matching snagless boot colors.

 

RJ-45 Connectors are the standard terminating interface for UTP (unshielded twisted-pair wire) network cabling.  The RJ-45 Termination Interface is the accepted 8-Pin international network interface as defined by the most current revisions of ANSI/TIA/EIA 568 and ISO/IEC 11801 Cabling Standards for Cat-5, Cat-5e and Cat-6 applications.  It should be noted that most homes and businesses use the 6-Pin RJ-11 as the standard telephone terminating interface (often referred to as Modular Plugs and Jacks or Mod-Plugs and Mod-Jacks). 

 

Important Note:  Using a 'cross-over cable' in a normal network application can cause a network failure. 

 

Unshielded Twisted Pair (UTP) network cabling achieves a certain level of EMI (electromagnetic interference) immunity due to the electrical properties of the FEP insulated twisted-transmission pairs' twist-ratio of 3-twists per inch.  When a UTP network cable is subjected to electrical interference, the noise affecting the twisted-pairs is cancelled in large part by 'Common Mode Rejection' due to the carefully selected insulating system and twist-ratio of the transmission pairs.  Higher levels of shielding performance can be achieved by using either ScTP or STP shielded network cabling.  It should be noted that the external shielding of ScTP and STP cabling improves performance but increases the overall cabling and installation costs.

 

Shielded Twisted Pair (STP) Cable is comprised of 4-twisted copper pair individually shielded with an overall metal foil (screen) with a drain wire and the outer cable jacket.  STP cables should be terminated using a shielded GG-45 connector or equivalent. 

 

Screened Twisted Pair (ScTP) Cable is comprised of 4-twisted copper pair shielded by a metal foil (screen) with a drain wire and the outer cable jacket.  ScTP cables should be terminated using a shielded GG-45 connector or equivalent. 

 

 

Standard RJ-45 Ethernet Patch Cords ~ Cat-5e & Cat-6

Part Number

Description

16851002-YY

Cat-5e UTP Cable:  RJ-45 - 8P8C Plugs; Overmolded Snagless Boots; 2.0 M (6.6 Feet)

16851003-YY

Cat-5e UTP Cable:  RJ-45 - 8P8C Plugs; Overmolded Snagless Boots; 3.0 M (9.8 Feet)

16851004-YY

Cat-5e UTP Cable:  RJ-45 - 8P8C Plugs; Overmolded Snagless Boots; 4.0 M (13.1 Feet)

16851005-YY

Cat-5e UTP Cable:  RJ-45 - 8P8C Plugs; Overmolded Snagless Boots; 5.0 M (16.4 Feet)

16851010-YY

Cat-5e UTP Cable:  RJ-45 - 8P8C Plugs; Overmolded Snagless Boots; 10.0 M (32.8 Feet)

16851015-YY

Cat-5e UTP Cable:  RJ-45 - 8P8C Plugs; Overmolded Snagless Boots; 15.0 M (49.2 Feet)

16861002-YY

Cat-6 UTP Cable:  RJ-45 - 8P8C Plugs; Overmolded Snagless Boots; 2.0 M (6.6 Feet)

16861003-YY

Cat-6 UTP Cable:  RJ-45 - 8P8C Plugs; Overmolded Snagless Boots; 3.0 M (9.8 Feet)

16861004-YY

Cat-6 UTP Cable:  RJ-45 - 8P8C Plugs; Overmolded Snagless Boots; 5.0 M (13.1 Feet)

16861005-YY

Cat-6 UTP Cable:  RJ-45 - 8P8C Plugs; Overmolded Snagless Boots; 5.0 M (16.4 Feet)

16861010-YY

Cat-6 UTP Cable:  RJ-45 - 8P8C Plugs; Overmolded Snagless Boots; 10.0 M (32.8 Feet)

16861015-YY

Cat-6 UTP Cable:  RJ-45 - 8P8C Plugs; Overmolded Snagless Boots; 15.0 M (49.2 Feet)

 

 

16 P U W XXX - YY

=

Part Number Legend

16

=

Network Component

P

=

8

=

Plug RJ-45:  8P8C

U

=

Ethernet Patch Cord Cable Performance Class

 

 

  5

=

Cat-5e – Class ‘D’ UTP

 

 

  6

=

Cat-6 – Class ‘E’ UTP

W

=

Ethernet Patch Cord Jacket Classification

 

 

  1

=

CMG – General Purpose

 

 

 2

=

CM  – Vertical Tray:   UL 1685 (UL 1581, Sec. 1160)

 

 

 3

=

CMP – Plenum:   NFPA 262 (UL 910)

 

 

 4

=

CMR – Riser:   UL 1666

 

 

 5

=

CMX – Residential:   UL 1581, Sec. 1080 (VW-1)

XXX

=

Ethernet Patch Cord Length

 

 

002

=

2-Meters (6.6 Feet)

 

 

 

003

=

3-Meters (9.8 Feet)

 

 

 

004

=

4-Meters (13.1 Feet)

 

 

 

005

=

5-Meters (16.4 Feet)

 

 

 

010

=

10-Meters (32.8 Feet)

 

 

 

015

=

15-Meters (49.2 Feet)

 

 

 

025

=

25-Meters (82.0 Feet)

 

 

 

050

=

50-Meters (164.1 Feet)

 

 

 

100

=

100-Meters (328.1 Feet)

 

YY

=

Ethernet Patch Cord Jacket Colors

 

 

01

=

Red

 

 

 02

=

Blue

 

 

03

=

Green

 

 

04

=

Yellow

 

 

05

=

Gray

 

 

06

=

Black

 

 

07

=

Orange

 

 

09

=

White

 

 

10

=

Violet

 

 

11

=

Custom Colors ~ Custom Color Orders require a Minimum Order Quantity equal to 25,000-Feet (7,620-Meters).  Production will not begin until the Customer has approved the 'color sample.'  Lead-time will be the prevailing lead-time after written 'color approval.' Case quantities will not be shipped with ‘mixed colors’ in a case.

 

 

Elite Electronics requires its fabricating sources to provide a written ISO Certificate of Compliance (C of C) inclusive of the product's ISO Manufacturing Date Code, RoHS - 2002/95/EC (Directive on the Restriction of the use of Certain Hazardous Substances in Electrical & Electronic Equipment) and WEEE - 2002/96/EC (Directive on Waste Electrical & Electronic Equipment) compliance with each production shipment.   

 

This Web Site is best viewed using Internet Explorer 7.0 or Mozilla Firefox.  Send mail to webmaster@elitelex.com with questions or comments about this web site.  Copyright 1995 - 2011 Elite Electronics, Incorporated