|
| |
Elite Electronics'
D-Subminiature Connectors
|
Elite Electronics'
Stock D-Subminiature Connector Selection Chart |
|
Series
'C' |
Series
'S' |
Series
'FR' |
Series
'RA' |
|
Crimp & Poke Style |
Solder Pot Style |
IDC Style |
Right Angle PCB |
|
9-Position |
9-Position |
9-Position |
9-Position |
|
Male |
Female |
Male |
Female |
Male |
Female |
Male |
Female |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
100901WX |
100902WX |
1209101WXY |
120902WXY |
130901WXY |
130902WXY |
140901WXY |
140902WXY |
|
15-Position |
15-Position |
15-Position |
15-Position |
|
Male |
Female |
Male |
Female |
Male |
Female |
Male |
Female |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
101501WX |
101502WX |
121501WXY |
121502WXY |
131501WXY |
131502WXY |
1415101WXY |
141502WXY |
|
25-Position |
25-Position |
25-Position |
25-Position |
|
Male |
Female |
Male |
Female |
Male |
Female |
Male |
Female |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
102501WX |
102502WX |
122501WXY |
122502WXY |
132501WXY |
132502WXY |
142501WXY |
142502WXY |
|
37-Position |
37-Position |
37-Position |
37-Position |
|
Male |
Female |
Male |
Female |
Male |
Female |
Male |
Female |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
103701WX |
103702WX |
123701WXY |
123702WXY |
133701WXY |
133702WXY |
143701WXY |
143702WXY |
|
50-Position |
50-Position |
50-Position |
50-Position |
|
Male |
Female |
Male |
Female |
Male |
Female |
Male |
Female |
|
 |
 |
 |
 |
Check Availability |
Check Availability |
Check Availability |
Check Availability |
|
105001WX |
105002WX |
125001WXY |
125002WXY |
135001WXY |
135002WXY |
145001WXY |
145002WXY |
|
Series ‘HD’ |
15-Position |
Elite Electronics
maintains an in-house inventory of 15-Position Series 'HD'
D-Subminiature Connectors in stock to support SVGA and DVI-Analog
applications. |
|
Solder Pot Style |
Male |
Female |
|
|
 |
 |
|
|
|
|
151501WXY |
151502WXY |
|
Elite Electronics'
D-Subminiature Connectors meet or exceed accepted electronics
industry interface and packaging form-factors and the specified
mechanical, electrical and environmental performance requirements and
test criterion of ANSI/TIA/EIA 364 for electronic connectors; and, are
RoHS Compliant. When ordering D-Subminiature connectors, please ensure
that you are ordering the correct interface configuration for your
application. Elite Electronics specifies only the highest quality raw
materials for use in its D-Sub Plugs and Receptacles. Elite Electronics
requires its fabricating sources to provide a written ISO Certificate of
Compliance (C of C) inclusive of the product's ISO Manufacturing Date
Code, RoHS - 2002/95/EC (Directive on the Restriction of the use
of Certain Hazardous Substances in Electrical & Electronic Equipment)
and WEEE - 2002/96/EC (Directive on Waste Electrical & Electronic
Equipment) with each production shipment. |
|
|
|
|
|
|
♦ |
Elite Electronics'
Series
'C,'
'S,'
'FR,'
'RA'
and
'HD'
D-Subminiature Connectors are
fully compatible with all standard D-Subminiature connectors with
corresponding pin configurations.
|
|
|
|
|
|
|
♦ |
Two-piece glass-filled
engineered thermoplastic insulator system that meets or exceeds the
self-extinguishing requirements of UL 94 V-0. |
|
|
|
|
|
|
♦ |
Available Interface
Pin Configurations: |
|
|
|
|
|
|
|
▪ |
Standard Pin
Configurations: 9, 15, 25, 37 &
50-positions |
|
|
|
|
|
|
▪ |
High Density Pin
Configurations: 15, 26, 44, 62 & 78-positions |
Performance
Characteristics. Elite Electronics' D-Subminiature Connectors
will meet or exceed the performance characteristics as specified in the most current version of
ANSI/TIA/EIA 364. Minimum electrical and
environmental performance capabilities shall be as follows:
|
D-Subminiature PLUG & RECEPTACLE FEATURES |
| |
|
D-Subminiature
Connector Mechanical Features:
|
|
|
|
|
|
|
A. |
Insulator: UL
94V-0 Glass Filled Engineered Thermoplastic.
|
|
|
|
|
|
|
B. |
Contacts:
Stamped
& Formed Brass or Phosphor Bronze.
|
|
|
|
|
|
|
C. |
Shell: Stamped
& Formed Steel.
|
|
|
|
|
|
|
D. |
Plating: |
|
|
|
|
|
|
|
1. |
Contacts: |
|
|
|
|
|
|
|
|
a. |
Nickel 50-microinches
(complete) as under-plating. |
|
|
|
|
|
|
|
|
b. |
Gold Flash, 30-microinches or
50-microinches
(complete). |
|
|
|
|
|
|
|
|
c. |
Selective Gold
over the nickel plated contact area, NC100 (or equivalent lead-free
solder) tinning over the nickel plated tail areas. |
|
|
|
|
|
|
|
2. |
Shell Housing: |
|
|
|
|
|
|
|
|
a. |
Sulfamate
Nickel
(or equivalent) over the copper plated stamped and formed metal
substrate; or,
|
| |
|
|
|
| |
|
b. |
Zinc Plated with yellow chromate coating
over the copper plated stamped and formed metal substrate. |
| |
|
