Elite Electronics specifies only the highest quality raw materials for use in fabricating its Assembly Hardware.  Elite requires its fabricating sources to provide a written ISO Certificate of Compliance (C of C) ensuring that the materials used meet or exceed any ANSI, ASTM, ISO, UL or CE Mark specified requirements; in addition to the product's ISO Manufacturing Date Code, RoHS - 2002/95/EC (Directive on the Restriction of the use of Certain Hazardous Substances in Electrical & Electronic Equipment) and WEEE - 2002/96/EC (Directive on Waste Electrical & Electronic Equipment) with each production shipment.   Custom product configurations and 'product kitting' to your specifications are available by special order.  Non-cancelable Minimum Order quantities will apply for special orders.  Production Custom Order deliveries will not ship until Elite has received a written First Article Acceptance for the Custom product from the Customer.  Delivery lead time shall be the lead time in effect upon receipt of the Customer's written First Article Acceptance. Please Note:  The product delivered may vary slightly in appearance from the graphic representations shown below.  The delivered product's actual performance, however, will meet or exceed Elite's stated performance requirements.

Female – Male Jack Screws		Female – Female Standoffs
3/16" Hex ~ 4-40	3/16" Hex ~ 4-40	3/16" Hex ~ 4-40	3/16" Round ~ 4-40
Female ~ Male	Female ~ Male Kits	Female ~ Female	Female ~ Female

Part Number	Description	Part Number	Description
30 42 50 X 1	0.250" 4-40 UNC 2A Male Thread Length	32 42 50 X 1	0.250" Body Length: 4-40 UNC 2B Female Threads - 2-Places
30 43 10 X 1	0.312" 4-40 UNC 2A Male Thread Length	32 43 10 X 1	0.312" Body Length: 4-40 UNC 2B Female Threads - 2-Places
30 43 70 X 1	0.375" 4-40 UNC 2A Male Thread Length	32 43 70 X 1	0.375" Body Length: 4-40 UNC 2B Female Threads - 2-Places
30 44 30 X 1	0.438" 4-40 UNC 2A Male Thread Length	32 44 32 X 1	0.438" Body Length: 4-40 UNC 2B Female Threads - 2-Places
30 45 00 X 1	0.500" 4-40 UNC 2A Male Thread Length	32 45 00 X 1	0.500" Body Length: 4-40 UNC 2B Female Threads - 2-Places
30 45 60 X 1	0.562" 4-40 UNC 2A Male Thread Length	32 45 60 X 1	0.562" Body Length: 4-40 UNC 2B Female Threads - 2-Places
30 46 20 X 1	0.625" 4-40 UNC 2A Male Thread Length	32 46 20 X 1	0.625" Body Length: 4-40 UNC 2B Female Threads - 2-Places
30 47 50 X 1	0.750" 4-40 UNC 2A Male Thread Length	32 47 50 X 1	0.750" Body Length: 4-40 UNC 2B Female Threads - 2-Places
Part Number Legend:       30 42 50 X Y
30 =	Jack Screw:  Female - Male  4-40 UNC Threads	X:	H = 3/16" Hex Body R = 3/16" Round Body
32 =	Standoff:  Female - Female  4-40 UNC Threads	Y:	1 = Steel ~ Zinc Plate       (Clear Chromate)
			2 = Brass ~ Nickel Plate

4-40 Zinc Plated Steel (Clear Chromate) Assembly Hardware
4-40 Hex Nut	Flat Washer	Split Lock Washer	Saddle Washer
0.188" x 0.060" Thick	0.220" O.D. / 0.120" I.D.	0.209" O.D. / 0.120" I.D.	4-40 ~ 0.209" W x 0.433" L
Part Number: 30 49 10 01	Part Number: 30 49 20 01	Part Number: 30 49 30 01	Part Number: 30 49 40 01

Male – Screw Lock Assemblies
U-Type	Butterfly Type
Thread:  4-40 UNC 2A	Thread:  4-40 UNC 2A
Part Number:  31 41 01 01	Part Number:  31 42 00 01

4-40 Slotted Philister-Head SEMS Assembly
	Part Number		Description
		33 45 71 01	Slotted Philister-Head
		33 45 71 02	Slotted & Notched Philister-Head (Special Order)
	Features:
	♦	4-40 2A Thread Slotted Philister-Head & Saddle Washer Assembly
	♦	SEMS: An integrated screw and washer assembly where the washer is assembled onto a screw blank before the threading operation
	♦	Nickel Plated Steel

Nickel Plated 4-40 2A Male Thread Thumbscrews
	Part Number		Description
		34 438 01 (ELTSZCST.438)	Slotted Philister-Head
		34 500 01 (ELTSZCST.504)	Slotted & Notched Philister-Head
3443801 – OD 4.00 mm x L 55.6 mm	Features:
	♦	Nickel Plated Steel
	♦	Various Thread & Body Lengths Available by Special Order
	♦	Custom Configurations Available by Special Order
3450001 – OD 4.00 mm x L 44.0 mm	♦	Slotted & Notched Knurled Drive Available by Special Order

Extended Neck Protective Rubber Grommets For Backshells
	Part Number		Description
		36 12 01 05	9 ~ 25-Position:   Backshells
		36 12 02 05	37 ~ 50-Position:  Backshells
	Features:
	♦	5-Piece Set - Various Size Cable Openings
	♦	Rubber Grommet Provides Improved Cable Retention & Strain Relief
	♦	Minimizes or prevents unwanted material from penetrating the backshell through the cable opening

D-Subminiature (D-Sub) Connector Slide Lock Assembly Kits
		Part Number	Description
		37 SL09 XX	09-Position:  Slide Lock Assembly Kit with screws
		37 SL15 XX	15-Position:  Slide Lock Assembly Kit with screws
	9-Position	37 SL25 XX	25-Position:  Slide Lock Assembly Kit with screws
		37 SL37 XX	37-Position:  Slide Lock Assembly Kit with screws
		Part Number Legend:
		XX:  01 =	Steel ~ Zinc Plate (Clear Chromate)
15-Position	25-Position	02 =	Steel ~ Nickel Plate

12-Position 25-Pin D-Subminiature (D-Sub) 2U Mounting Panel
	Part Number		Description
		38 25 2U 19 01	Gray:   12-Position D-Sub Distribution Panel
		38 25 2U 19 02	Black:  12-Position D-Sub Distribution Panel
	Features:
	♦	2U = 3 1/2" x 19" Mounting Space
	♦	12 – 25-Position D-Subminiature Connector Mounting Positions
	♦	9, 15, 37 & 50-Position and Custom Color Distribution Panels are available by special order

Elite Electronics requires its fabricating sources to provide a written ISO Certificate of Compliance (C of C) inclusive of the product's ISO Manufacturing Date Code, RoHS - 2002/95/EC (Directive on the Restriction of the use of Certain Hazardous Substances in Electrical & Electronic Equipment) and WEEE - 2002/96/EC (Directive on Waste Electrical & Electronic Equipment) compliance with each production shipment.  

This Web Site is best viewed using Internet Explorer 6.0 or Mozilla Firefox.  Send mail to webmaster@elitelex.com with questions or comments about this web site.  Copyright 1995 - 2009  Elite Electronics, Incorporated